FastCap has grown exponentially and has expanded its products base to a vast array of woodworking products and tools designed to accommodate the professional cabinet maker and woodworker needs.
FastCap strives to create the most innovative, practical and relevant tools and products.
Innovative products for the serious woodworker.
- Hardware
- Workwear
- Peel & Stick
- Tools
- Adhesive Systems
- Safety Equipment
- Finishing
The GluBot, HighBot, and BabeBot from FastCap are designed by cabinetmakers and woodworkers. They are easy to fill, they don’t drip, and they dispense glue in both horizontal and vertical position it will be the best glue bottle you will ever own.
ProCarpenter AutoLock Tape Measure
The ProCarpenter AutoLock tape measure has all the features of the original ProCarpenter Tape Measure, plus the autolock and super-ergonomic design. Simply pull the blade out and it stays in place then push the release button to retract the blade.
FastCap ProCarpenter Tape Measures feature 7 innovative improvements over standard tape measures:
- Lever action belt clip
- Pencil sharpener
- Dual locking system
- Erasable notepad
- Heavy-duty 1-inch blade
- High-contrast tape
- Rugged compact design
Uni-Vac Shop Vacuum Accessory
The UNI-VAC is the ultimate shop vacuum accessory. The super flexible rubber grips around most sizes and shapes of vacuum ports. Adapts to most table saws, routers, miter saws, sanders, and the list goes on! The innovative locking teeth allow you to secure the UNI-VAC in place. The fixed end attaches around all vacuum hoses with an inner diameter (ID) of 2-1/4” such as RIGID® Hose. Another great innovation, designed by a cabinet maker!
Screw Gun Holders
The screw gun holder is the most versatile tool holder for your drill, screw gun, or almost any other tool you have! Stop misplacing your tools and wasting valuable time searching for them! This will bring a new level of organization and speed to any shop or work station in just seconds.
Blue Dog Bench Dog System
The Blue Dog is a product that gives great functionality to your workbench when dogs are needed. Simply use a 2½” hole saw to drill out a hole, sand the top edge, and press the Blue Dog down into the hole until flush. Detents allow easy and accurate height adjustment for any material thickness and the turntable feature allows great flexibility on your workbench. Another great product developed by a cabinet maker on the shop floor.
3 Way Clamp
Edge trim isn’t always easy to install and taping trim doesn’t always provide the pressure needed for bonding edging. FastCap’s solution is the 3 Way Clamp. We’ve combined the usual spring clamp with an additional spring that applies a third direction of pressure. With approximately 30 lbs of clamping pressure, the 3 Way Clamp can provide a better bond. And with the addition of the 3 Way Clamp Lock, it now has the ease of a spring clamp and the holding power of a screw clamp.
Best Fence System
The Best Fence System was created as a stand for your chop saws & miter saws and was designed from the ground up to give you shop level accuracy in the field.
This highly modular system is easy to set up, transport and allow you to dial in your miter or chop saw for exact cuts every single time.
Georgetown Marketing Special:
Special Offer : $395.00 – 10% off MSRP!
SpeedBrace Shelving
Save time and space with FastCap’s SpeedBrace. SpeedBraces are perfect as Work Station Brackets, Countertop Braces / Hidden Countertop Supports and comes in stainless steel option.
ChopShop Saw Hood
The Saw Hood was designed by a general contractor to eliminate the catastrophic dust problem created by miter saws. It sets up in seconds and contains 95% of the dust. You will be amazed at how effective this product is.
The Saw Hood Pro is identical in function to the Saw Hood but is made out of spring steel so it can fit into a compact bag. If space is an issue, this is the tool for you.
The Shop Saw Hood is the new rigid hood that fits on any miter box saw in a fixed location. It’s rugged and effective, the perfect application for capturing all the dust in a production environment or home shop. The panels come packed flat and take just minutes to assemble and install. Its easily customizable width makes it fit perfectly on any and every saw. We provide the side panels, all you need to provide is (3)1”x3” boards cut to your desired Saw Hood width. Cut the backing to 48” long and the same width as the 1”x3” pieces, with a thickness up to 1/4” of either plexiglass, laminate or signboard to create the curved hood.
The Saw Hoodie is our latest generation of saw hoods to effectively address the difficult problem of dust collection on miter box saws. It’s super small and compact and works best on smaller 8-inch saws but can work on larger 10 and 12-inch saws as well. It’s designed specifically for quick and minimal setup and takedown on job sites. Its super flexible metal spring ring design allows this hoodie to spring open and mount into the accessory holes on your saw. There is even a vacuum hose hole in the back that allows you to attach a shop vacuum for added dust collection.
3rd Hand Product Line
The 3rd Hand is the help you have been looking for. If you ever wished you had an extra hand, look no further.
It is rugged, built to last a lifetime and it’s never late for work! Brace, jack, or support whatever you need.